Location: Home >> Inspection Equipment

CGI CSS Inspection Equipment

CGI offers Four Cross Sectional Scanning Platforms using Spec.Check 3-D Point Cloud Inspection Software-the Metrology Standard in Medical Device Injection Molded Parts Inspection: The quality control technology software OEM's rely on for scanning and inspecting the complex internal geometry of small medical device parts.

	Pearl-700 This new smaller system is used to perform cross sectional scanning, including 3-D capture, inspection and measurement, of small,  complex medical device parts that can fit within an envelope of  2.5 x 1.75 x 3.5 inches (or 63 x 44 x 88 mm). LEARN MORE...
	CSS-300 This system is used to perform cross sectional scanning of small medical parts that fit within an envelope of 7 x 5 x 9 inches (or 18 x 12.5 x 23 cm). LEARN MORE...
	CSS-1000 The CSS-1000 is used to perform cross sectional scanning of small medical parts that fit within an envelope of 12 x 10.5 x 8 inches (or 30 x 26 x 20 cm). LEARN MORE...
	Spec.Check Software This Spec.Check inspection software is used for the small parts inspection of the first piece out of the mold. It is used to document mold qualification and to verify if an injection mold is production-ready. It saves users time in performing plastic part inspection measurements; up to 75% in some applications. LEARN MORE...

Click here for machine inspection Report Samples
View different angles and cross sections of a report.